Adding QM views to plant 1005
1. In mm01 select QM view along with the other views
2. Click on inspection set up.
3. Click on inspection types then you have to enter "03" and check "active"
4. Press enter and continue doing accounting views like any another normal part set up.
IN ROUTING>
A-- .After you enter 1 and 4 for usage and overall status. Please type 150 and choose default according to below screenshot.
B.--- Click on operations as you do, and enter these 2 fields according to screenshot shown
C---Select line 0020 - Attribute inspection
Click on inspection characteristics--.
D----Click on copy characteristics , press enter then use 3000005907 as reference part number press enter
E----then a screen pops up, select all fields except the last 5 fields at the bottom. ( All ATTRIBUTE INSPECTION LINES) basically all line items with 0020.
To select all choose the button highlighted at thw bottom in blue.
F---Then Select line item 0030 - 24 hours box inspection repeat steps C to E scroll to full bottom then select the last 5 lines for this then enter or press execute go back to routing page.
G--- Double click on Attribute inspection and scroll fully to bottom
'and change to 3. automatic valuation based on inspection field.
H--- Repeat this by double cllicking on 24 hours inspection
Continue remaining master data steps.